Technical Properties
Synthetic resin in emulsion, colorless and solvent-free which, after drying, stops air bubbles coming to the surface.
USAGE
- For indoor use only.
- Primer and keying bridge for the products MORTEX® COLOR 2-N, F1, F2, F3, F4 and BEALSTONE® and similar products.
- For absorbent substrates.
ADVANTAGES
- Solvent-free
- Prevents air bubbles coming to the surface
IDENTIFICATION DATA
- Status: Liquid
- Appearance: Milky
- Color: Whitish
- Odor: Characteristic
- Density (EN NBN 1015-10): 1066 kg/m³
- Relative density (at 20°C): 1.066 kg/L
- Packaging: 5L canisters, 1L bottles
- Storage: 6 months in a dry place, protected from frost, not on the ground and in the original unopened packaging (p. 1). Never leave products in direct sunlight.
- Volatile organic compounds (VOC) content: < 0.0025%
- Customs classification: 39 09 50 90
USAGE DATA
- Yield: from 100 to 150 ml/m² depending on substrate porosity.
- Application temperature: min +5°C to max +30°C.
- Relative humidity: min 65% and max 90%. It is prohibited to use devices that can dry the air humidity (dehumidifiers, air conditioners, etc.) 1 week before and after work, as well as during the application itself.
- Substrate moisture: < 3%
- Drying time (at 20°C): Touch dry: 3 hours / Full drying: from 6 to 8 hours.
SUBSTRATE AND ITS PREPARATION
The substrate must be solid, dry before and after coating, clean, matte and non-greasy. It must be hard, frost-resistant and not crumbly.
Remove all loose or poorly adhering parts, as well as any materials that may affect adhesion.
Thoroughly wipe off dust.
There must be no standing water on the surface during coating.
MIX PREPARATION
"RESIDUR" is ready to use and applied directly from the container.
USAGE
"RESIDUR" is applied with a roller, brush, or paintbrush in one layer.
OTHER INSTRUCTIONS
CLEANING TOOLS
Rinse off product residues with water while it is still wet.
WARNINGS
- Until the product is completely dry, the work area must be protected from rain, sun, wind, and cold.
- It is strongly not recommended to coat on substrates containing salts (sodium sulfate, nitrates, calcium, etc.).
- Do not apply if there is moisture in the substrate.
TIP
"BEAL" highly recommends attending one or several training courses on "MORTEX" brand products, depending on the nature of the work being done. The company regularly organizes various types of training courses (according to different usage systems) at its headquarters or with distributors. They are available for both professionals and private individuals.
After completing the training courses, private consultations at the workplace can be organized. For more information, please contact us.
Strictly follow the instructions for use, considering the product's purpose. Never use other products than those specified in this technical data sheet to avoid any risk of failure.
Always conduct tests with the selected protective agent, as each pigment and each protection reacts differently.
For one object and each product type, always use products from the same batch number.