NITRO STAINS are stain products designed to give wood an intense color while accentuating its pore structure. Ready-to-use, they are ideal for highlighting natural grain and enhancing the decorative appearance of the substrate. Used for both professional and decorative projects, they guarantee fast, uniform results that enhance the beauty of the wood.
Base: Solvent-based pigments and dyes
Aspect: 18 different shades
Density: ± 0.01 to 0,09 g/cm³
Dilution: Ready for use. However, the shade can be lightened with TH-0609PUR thinner and the drying time slowed down with TH- 0718 retardant.
Drying time: 15 to 30 minutes = dust-free depending on finish and application method
As this is a solvent-based stain, it is imperative to wear gloves, a respirator and safety goggles before handling.
Spray a small excess of nitro stain onto the surface. After a period of impregnation, remove the excess with a lint-free cloth soaked in the stain, rubbing in the direction of the wood grain. For a more even finish, you can also even out the surface with a stain brush.
Soak a sponge or lint-free cloth in stain and apply evenly in the direction of the wood grain. To remove excess stain, start by rubbing across the grain (to block pores), then rub back in along the grain to even out.
For industrial use, a calender enables fast, even application over large surfaces, while maintaining good color homogeneity.
Whichever method you use, be sure to distribute the product evenly and remove any excess to avoid overloading and ensure an even finish with no visible marks.
Your Dynamic Snippet will be displayed here...
This message is displayed because youy did not provide both a filter and a template to use.
