PROTECT is a 2-component, water-based, 100% polyurethane varnish designed for finishing wood floors subjected to heavy use (public spaces, staircases, high-traffic areas, etc.). Its two-component formulation (HD-4008 resin + PUR-1020 hardener) offers exceptional resistance to abrasion, impact, and chemicals. Its matte finish, NMP-free composition, A+ certification, and high UV protection make it an ideal professional product for demanding environments.
Base: Waterborne PU resin
Appearance: Translucent emulsion
Density: ±1.05 g/cm³
Dilution: Can be diluted with 5 or 10% water if necessary
Standards/Conformities: VOC levels compliant with current European regulations (DECOPAINT)
Brilliance: 10 to 15%
Apply the product regularly in the direction of the wood grain, in 2 m² sections, without applying too much pressure to the roller in order to obtain well distributed layers.
Allow to dry until the slightly milky appearance disappears. Monitor consumption to achieve approximately 1 liter per 4 square meters of finished parquet flooring.
After the first coat, let it dry for 4 hours (between 13 and 25 °C with a humidity of 30 to 60%).
Apply the second coat, let it dry for 12 hours, then sand with P220 grit. Dust thoroughly before applying the third coat. Three coats are recommended.
Check that the final consumption reaches ± 240 g/m². If not, apply a fourth coat to guarantee the product's performance.
Your Dynamic Snippet will be displayed here...
This message is displayed because youy did not provide both a filter and a template to use.
