Technical Properties
Purpose
For indoor work:
Floors
Walls
Countertops
Protection of concrete, mineral, and wooden coatings
Advantages
Transparent
Does not yellow or degrade
UV resistant
Strong and durable
| Characteristic | Value |
|---|---|
| State | Liquid |
| Appearance | Syrup |
| Color | Colorless |
| Odor | Characteristic |
| Density (NBN EN 1015-10) | 900–1100 kg/m³ |
| Density (20 °C) | 0.90–1.10 kg/l |
| Packaging 1 kg | A: 0.83 kg; B: 0.17 kg |
| Packaging 5 kg | A: 4.15 kg; B: 0.85 kg |
| Storage | 6 months, in a dry place, without cold, not in sunlight |
| LOJ content | 56.5% |
| Muitinės klasifikacija | 32 08 90 91 |
| ADR classification | UN 1866 RESIN SOLUTION, 3, III (D/E) |
| Consumption | 100–150 g/m² per layer |
| Layer thickness | 40 microns |
| Working temperature | +5 °C to +25 °C |
| Air humidity | <80% (it is prohibited to use dehumidifying devices one week before and after work) |
| Substrate moisture | <3% |
| Drying time (20 °C) | Touch dry: 1 h; light foot traffic: 8 h; between layers: 8–48 h; light use: 72 h; full cure: 7 d. |
🔧 Substrate preparation
The substrate must be:
dry before and after coating,
clean, matte, grease-free,
hard, frost-free, undamaged by cold,
non-crumbling.
🧪 Mixture preparation
Mix only as much as needed.
For matte varnish – mix both components separately to allow the measuring agent to rise into suspension.
After mixing – scrape the edges and bottom of the container to ensure the mixture is homogeneous.
The mixed product cannot be stored.
🖌️ Coating
Applied with a brush or short-haired roller (4 mm).
Before drying, check roller marks in bright light.
After drying, a thin layer of BEALWAX can be applied.
Full resistance – after 7 days.
🧽 Tool cleaning
Fresh product is cleaned TRI BE with a cleaner (according to technical instructions).
⚠️ Warnings
Protect from rain, sun, wind, and cold.
Do not use on surfaces containing salts (sulfates, nitrates, calcium).
Do not use in damp rooms or places with thermal shocks.
Surface color may change.
Do not use slippery tools until fully dry.
Always perform a test.
Use products with the same batch number for one item.
🛡️ Safety
Flammable, harmful if inhaled.
Avoid vapors and aerosols.
Avoid contact with eyes and skin.
If in eyes – rinse with water and seek specialist.
Use gloves, mask, ensure good ventilation.
♻️ Environmental protection
Dispose of waste at a specialized collection center.