Technical Properties
FINISH SA & SA TR is a transparent protective mixture based on plant oils. A blend of oils intended for the production of natural soaps with water-repellent additives.
AREAS OF APPLICATION
- For indoor work.
- For walls.
- A product type for the protection of mineral coatings MORTEX® COLOR.
ADVANTAGES
- Natural product.
- Transparent.
- Minimally changes the appearance even on those bases with a pastel tone.
- Suitable for white surfaces.
- Provides a light wet surface effect.
| Characteristic | Identification data |
|---|---|
| State | Solid form (FINISH SA TR) or liquid (FINISH SA) |
| Appearance | Paste (FINISH SA TR) or thick liquid (FINISH SA) |
| Color | White (FINISH SA TR) or brownish yellow (FINISH SA) |
| Smell | Specific |
| Apparent density (at 20 degrees Celsius) | 0.92 kg/l |
| Packaging | 5 kg or 750 g net volume buckets |
| Storage | 6 months in a dry, frost-protected place, in the original closed packaging, avoiding contact with the ground. Never leave products in direct sunlight. |
| Customs code | 15 18 00 31 |
| Parameter | Usage data |
|---|---|
| Yield | From 150 to 200 g/m² depending on the substrate's porosity. |
| Application temperature | From 5 to 30 degrees Celsius. |
| Air humidity | From 65 to 90 percent. It is prohibited to use devices that can dry the air, 1 week before, during, and after the work. |
| Substrate moisture | Less than 3 percent. |
| Drying time (at 20 degrees Celsius) | Touch dry: 20 min. Between layers: 15–20 min. Light movement: after 1 hour. Complete drying: 3 hours. |
SUBSTRATE AND ITS PREPARATION
The substrate must be sound, dry before and after application, clean, matte, free of dust and grease. It must be solid, non-flaking, and non-crumbling.
MIX PREPARATION
Mix the product well so that the contents of the package become completely homogeneous.
APPLICATION PROCESS
- Apply with a cloth, Japanese spatula, or brush.
- Distribute the product immediately to avoid uneven absorption marks that may leave stains on the substrate.
- Wait for the coated surface to become matte and slightly harden.
- Repeat this operation 3–4 times to ensure the substrate is well saturated.
- Initially, white streaks may appear, but they do not stain the substrate and can be easily washed off with water.
POLISHING
Once completely dry, polishing with a sheepskin-type pad will provide a satin finish and distribute the product more evenly on the surface.
TOOL CLEANING
Fresh product is cleaned with lukewarm or hot water.
MAINTENANCE
- Surfaces treated with FINISH SA or FINISH SA TR require maintenance without aggressive agents.
- For daily cleanliness maintenance, use FINISH SA TR diluted in water.
- For lime removal, use vinegar diluted in water. Start with a low concentration and increase it depending on the water hardness.
- To renew protection, apply a new layer of FINISH SA or FINISH SA TR with a cloth at least 1–2 times a year, ensuring all lime residues are removed beforehand.
WARNINGS
- The work area must be protected from rain, sun, wind, and cold until completely dry.
- It is highly discouraged to apply on substrates containing salts.
TIPS
- Strictly follow application protocols according to the product's purpose. Never use other products than those specified in this technical data sheet.
- For the same object and the same type of product, always use products with the same batch number.
- Always conduct test trials with the chosen protective agent, as each pigment and protection reacts differently.
ENVIRONMENTAL PROTECTION
Dispose of at a specialized waste collection center.
SAFETY
- Protect skin and eyes.
- In case of contact with skin or eyes, rinse immediately with plenty of clean water.
- If problems arise, consult a specialist.
- The safety data sheet is provided upon request.
LEGAL NOTICE
Recommendations for the final use and application of products are provided honestly, based on the manufacturer's knowledge under normal conditions. Differences in materials and specific conditions at the site do not provide any other warranty, except for the statutory warranty for hidden defects. Users must familiarize themselves with the latest version of the relevant product instructions.