Technical Properties
A wax-based paste made from beeswax, carnauba wax, candelilla wax, and turpentine spirit; silicone-free.
AREAS OF APPLICATION
- Inside.
- Protection of mineral coatings, concrete, wood, etc.
ADVANTAGES
- Nourishes.
- Restores (regenerates).
- Protects.
- Gives gloss to the base.
| IDENTIFICATION DATA | |
|---|---|
| State | Solid |
| Appearance | Paste |
| Color | Whitish |
| Odor | Characteristic |
| Apparent density (at 20°C) | 0.814 kg/l |
| Packaging | 350 ml net jars 2.5 l net containers |
| Storage | 6 months in a dry and frost-protected place, in the original closed packaging. |
| VOC content (COV) | 73.71 % |
| Customs classification | 34 04 90 10 |
| ADR classification | "UN 1993 FLAMMABLE LIQUID, 3, III, (D/E)" |
| USAGE DATA | |
|---|---|
| Yield | From 20 to 60 g/m², depending on the substrate's porosity |
| Application temperature | Nuo +5°C min. iki +30°C maks. |
| Drying time (at 20°C) | 30 minutes |
SUBSTRATE AND PREPARATION
- The base must be healthy, dry before and after application, clean, matte, dust-free, and non-greasy.
- It must be solid, non-crumbling, and not peeling.
MIX PREPARATION
BEALWAX used ready (as is).
APPLICATION (MISE EN ŒUVRE)
- Apply with a brush or cloth (made of white cotton to avoid wax staining from pigments in colored fabrics).
- Allow to dry for 30 minutes.
POLISHING
Once completely dry, polishing with a "sheep's wool" type disc will give a satin finish and distribute the product better on the surface.
VARIOUS DATA
TOOL CLEANING
Fresh product is cleaned dry or using turpentine, with a spatula or cloth.
MAINTENANCE
- For surfaces coated with BEALWAX, maintenance is required without corrosive agents.
- For cleanliness maintenance: diluted in water FINISH SA TR.
- For lime removal (also for mixers): diluted vinegar in water. Start with a low concentration and increase it depending on your water hardness.
- For renewing protection: apply a new layer of BEALWAX with a cloth at least 1–2 times a year, before losing the "water-repellent" (beading) effect, ensuring all lime residues are removed beforehand.
WARNINGS
- Work areas must be protected from rain, sun, wind, and cold until completely dry.
- It is strictly not recommended to apply on bases containing salts (sodium sulfate, nitrates, calcium...).
TIPS
- Griežtai laikykitės dengimo protokolų pagal produkto paskirtį. Niekada nenaudokite kitų produktų, nei nurodyta šioje techninėje kortelėje, kad išvengtumėte bet kokios žalos rizikos.
- Always use products with the same batch number for the same object and the same product type.
- Always conduct tests with the selected protection, as each pigment and each protective agent reacts differently.
ENVIRONMENTAL PROTECTION
Dispose of at a specialized waste collection point.
SAFETY
Flammable product. Ingestion may harm the lungs. Keep out of reach of children. If swallowed, seek medical attention.