Technical properties
Colorless, transparent, liquid solution based on a mixture of weak acids, ready to use for dissolving salts (efflorescence) and lime. Always rinse with clean water.
AREAS OF USE
- Indoors and outdoors.
- Removal of salts from mineral substrates.
- Removal of lime from mineral substrates.
ADVANTAGES
- Easy to use.
- Mixture of weak acids = limited hazard.
- Volatile.
| IDENTIFICATION DATA | |
|---|---|
| State | Liquid |
| Appearance | Water |
| Color | Colorless |
| Odor | Characteristic |
| Relative density (at 20°C) | 1.014 kg/l |
| Packaging | 5 l net canisters 1 l net bottles |
| Storage | 6 months in a dry, frost-protected place, in the original closed packaging, without contact with the ground. Never leave products in direct sunlight. |
| Customs classification | 28 11 19 80 |
| ADR classification | "UN 2790 ACETIC ACID SOLUTION, 8, III, (E)" |
| USAGE DATA | |
|---|---|
| Yield | From 100 to 150 ml/m²/for one layer |
| Application temperature | From +5°C min. to +30°C max. |
| Air humidity | 65 % min. and 90 % max. It is prohibited to use devices that can dry the air humidity (dehumidifiers, air conditioners, etc.) 1 week before the work, during it, and after. |
| Base moisture | Soaked with water but appearing matte. |
BASE AND PREPARATION
- The base must be sound, clean, grease-free, and damp (matte from water).
- Remove all non-rotating or low-adhesion parts.
- Thoroughly wipe off dust.
- During use, there must be no standing water on the surface.
MIX PREPARATION
DISSEL A15 used pure (as is) or diluted with 10 to 50 % clean water, depending on the stains being cleaned and the type of base.
WORK EXECUTION
- Well moisten the base so that it becomes "matte" from water.
- Apply DISSEL A15 with a brush or roller.
- Let it act for 1 minute.
- Scrub vigorously with a brush.
- Rinse with clean water.
- If necessary, repeat the procedure.
VARIOUS DATA
TOOL CLEANING
Fresh product is washed with water.
WARNINGS
Work areas must be protected from rain, sun, wind, and cold until completely dry and (or) until fully filled with water (if applicable).
TIPS
Strictly adhere to the coating protocols according to the product's intended use. Never use other products than those specified in this technical data sheet to avoid any risk of damage.
For the same object and the same product type, always use products with the same batch number.
ENVIRONMENTAL PROTECTION
Dispose of at a specialized waste collection point.
SAFETY
Solution based on weak acids. Keep out of reach of children. Avoid contact with skin and eyes. In case of contact with eyes or skin, rinse immediately with plenty of water and seek medical advice.