BASICOLL 870 is a single-component, high-viscosity polymer adhesive specially developed for bead-laying solid and engineered parquet. Presented in a 600 ml pouch, it offers clean, targeted application, ideal for substrates requiring linear adhesion. Its solvent-free, VOC-free formulation and A+ indoor air quality certification make it a healthy, effective and easy-to-use solution on the job site.
Base: Polymer adhesive on a revolutionary base with a memory molecule (permanent elasticity)
Ensure a temperature between 13 and 25°C and a relative humidity of 40 to 60 %. The substrate must have < 2 % of humidity and be sound. Allow the adhesive to acclimatize on site for a few days.
Unpack and store parquet at least 3 days beforehand, at a humidity level of between 8 and 11 %. For exotic woods, clean with acetone (TH-1391) and allow to dry.
Place 10 to 15 mm spacers between wall and floor, and cut the tip of the glue bag, then use a cutter to obtain a circular nozzle of at least 6 mm for bead-laying.
Apply the adhesive to the floor in beads spaced 10 mm apart, then lay the boards, pressing to ensure uniform adhesion.
Once cured, the glue can be removed mechanically without leaving a trace.
Your Dynamic Snippet will be displayed here...
This message is displayed because youy did not provide both a filter and a template to use.
