BLACK ACTIVATOR is an optional brown activator designed to accentuate the depth and richness of reactive stains applied to wood. Used as a primer in the BASINTAGE RS system, it helps achieve sharper contrasts and more intense visual effects. Formulated without NMP and water-based, it combines aesthetic performance with respect for the environment.
Aspect: Brown solution
Dilution: Dilute with water according to the table on pages 4 and 5 of the technical data sheets, depending on the desired final shade.
Drying time: Relative humidity and ambient temperature - see technical data sheet for details., Fast drying time (approx. 2 to 3 hours per coat), depending on the quantity applied.
Use stable floorboards (solid or multilayer with a wear layer of at least 4 mm). The wood needs to be aged mechanically to achieve an ANTICO effect: you can break the edges, wear down the planks, scratch them, scrape them the old-fashioned way, or even lightly burn them. This initial treatment will strongly influence the final finish of Black Activator.
Preferably use brushes or rollers. Coco brushes or a spray gun are also suitable. If you opt for immersion treatment, you can also prepare baths for dipping the boards in the product.
Shake the Black Activator can thoroughly before use to ensure homogeneity. Never mix with other ANTICO products, to avoid undesirable chemical reactions.
Apply Black Activator undiluted or diluted, depending on the desired effect. Apply by brush, roller or spray. Do not wipe off after application: leave to dry naturally to allow the shade to develop evenly.
Do not leave the can open for too long, to preserve the product's reactivity. Do not use metal objects with ANTICO 3 or Black Activator; use plastic tools instead. Finally, make sure your multi-layer parquet has at least 2.5 mm of wear layer before application.
Your Dynamic Snippet will be displayed here...
This message is displayed because youy did not provide both a filter and a template to use.
