Basidur BD-0200X marine varnish is a one-component, modified oil-based (alkyd urethane) varnish designed to protect exterior woodwork exposed to the most extreme conditions: chalets, decks, shutters, boats, etc. It forms a glossy, transparent film that is highly resistant to weathering and UV rays. It is easy and effective to apply to parquet floors, furniture, or stairs. The product is now available in matte (BD-02002) and satin (BD-02003) finishes, for a finish suited to every need. Note: in professional jargon, this varnish is often referred to as a “polyurethane varnish,” although it is a urethane varnish.
Base: Solvent-based urethane alkyd resin
Appearance: Amber liquid
Density: From ± 0.91 to ± 0.93 g/cm³
Dilution: White spirit TH-0030
Standards/Conformities: VOC levels compliant with current European regulations (DECOPAINT)
Drying time: 24 hours = ready to apply a second coat, 6 hours = dust-free, 7 days = fully cured
If the wood is exotic or special (walnut, olive, etc.), remember to degrease it thoroughly before applying BASIDUR.
Apply in the direction of the wood grain, in small sections of 2 m², without applying too much pressure to the roller to ensure a thick and even coat. Take care with non-drying woods, especially for floors.
Allow the first coat to dry for 24 hours at a temperature of 13 to 25°C and a humidity of 30 to 60%.
Sand with P220 grit, remove all dust, then apply the second coat (the first coat can be diluted with approximately 10% TH-0030). For parquet flooring, three coats are recommended.
Check coverage after the second coat. Apply 2 to 3 coats for furniture and 3 coats for exterior structures. Avoid application in direct sunlight.
Your Dynamic Snippet will be displayed here...
This message is displayed because youy did not provide both a filter and a template to use.
