BASIKITT is a ready-to-use wood filler designed for the quick and effective repair of wood defects: holes, cracks, and splits. Its tinted, malleable paste is easy to apply, dries quickly, and provides a clean finish before varnishing or oiling. Available in 8 colors to match all wood species, it offers a simple and clean solution for repairing wood surfaces.
Base: Cellulose resin + natural wood
Appearance: Pasty
Density: ± 0.3 g/cm³, 9 to 1
Dilution: With TH-0609PUR or TH-1391 thinner
Standards/Conformities: VOC levels compliant with current European regulations (DECOPAINT)
Drying time: Approximately 1 hour = complete drying and recoating possible, Approximately 20 to 30 minutes = dust-free. Depends on the quantity applied.
Use the ready-to-use paste as is, without adding anything. Do not apply more than 5 mm thick. If the hole is deeper, fill it in several layers to prevent shrinkage as it dries.
Carefully spread and level the product using a wooden or plastic spatula, taking care not to scratch the wooden surface.
For deep holes, apply several thin coats, spaced 30 minutes apart, until a satisfactory level is achieved.
Allow to dry completely for approximately 1 hour for a 2 mm layer. Adjust this time if multiple layers have been applied.
Once the drying is complete, sand the area with 120 grit sandpaper. This helps prevent any halos around the filled areas when applying varnish or a finish.
Your Dynamic Snippet will be displayed here...
This message is displayed because youy did not provide both a filter and a template to use.
